LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Backup Unit >> Installation

Backup Unit: Installation

  1. Install the backup unit.
  2. Install the audio assembly or navigation assembly. Refer to ENTERTAINMENT & MONITORING>AUDIO>INSTALLATION .
  3. Install the panel - center UPR. Refer to ENTERTAINMENT & MONITORING>AUDIO>INSTALLATION .
  4. Install the grille assembly - CTR ventilation.
  5. Connect the ground terminal to 12V engine restart battery sensor. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, connect the battery negative terminal.
scientia non olet · About LEMON Manuals