LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Power Amplifier >> Removal

Power Amplifier: Removal

NOTE: Remove the power amplifier assembly after sliding the passenger's seat back and forth as necessary.
  1. Disconnect the ground terminal from 12V engine restart battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, disconnect the battery negative terminal.
  2. Remove the power amplifier assembly.
    1. Remove the harness clip, and disconnect each connector.
    2. Remove the nut and remove the power amplifier assembly.
      G11246751Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals