LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center (Service Information) >> Warning Box >> Removal >> MODELS WITHOUT EyeSight

MODELS WITHOUT EyeSight

  1. Disconnect the ground terminal from 12V engine restart battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, disconnect the battery negative terminal.
  2. Remove the overhead console. Ref. to LIGHTING SYSTEM>SPOT MAP LIGHT>REMOVAL .
  3. Remove the warning box.
    1. Disconnect the connector.
    2. Remove the screws, and remove the warning box.
      G11246177Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals