LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center (Service Information) >> Switches and Harness >> Inspection >> Trip Reset Switch

Trip Reset Switch

  1. Measure the resistanc e between connec tor terminals.

    Preparation tool: 

    Circuit tester

    G11246174Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    1 - 2 Switch OFF 1 MΩ or more
    Switch ON Less than 1 Ω
  2. Replace the switch - meter if it is found defective.
scientia non olet · About LEMON Manuals