LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center (Service Information) >> Multi-function Display (MFD) >> Installation

Multi-function Display (MFD): Installation

CAUTION:
  • Make sure the electrical connector is connected securely.
  • Make sure that the multi-function display operates normally.
  1. Install the multi-function display.
  2. Install the cover - center UPR.
  3. Install the audio assembly or navigation assembly.
  4. Install the panel - center UPR.
  5. Install the grille assembly - CTR ventilation.
  6. Connect the ground terminal to 12V engine restart battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, connect the battery negative terminal.
scientia non olet · About LEMON Manuals