Inspection Using Can Diagnostic

Trouble causes: 

Improper body integrated unit setting

Courtesy of SUBARU OF AMERICA, INC.

1. CHECK BODY INTEGRATED UNIT REGISTRATION STATUS  .

   Check that settings of body integrated unit correspond to vehicle equipment. Ref. to BODY CONTROL (DIAGNOSTICS)>REGISTRATION BODY INTEGRATED UNIT .

   Does the vehicle equipment correspond to settings?

   Yes  : Go to  2.

   No  : Match the settings of the body integrated unit with the vehicle equipment.

2. CHECK BODY INTEGRATED UNIT CUSTOMIZE SETTING  .

   Check that settings of body integrated unit correspond to vehicle condition. Ref. to BODY CONTROL (DIAGNOSTICS)>CUSTOMIZE .

   Do the customize settings correspond to the vehicle condition?

   Yes  : Go to  3.

   No  : Match the settings of the body integrated unit with the vehicle condition.

3. CHECK FACTORY INITIAL SETTING OF BODY INTEGRATED UNIT  .

   Confirm [Factory initial setting] of body integrated unit registrations is [Market]. Ref. to BODY CONTROL (DIAGNOSTICS)>REGISTRATION BODY INTEGRATED UNIT .

   Is it set to [Market]?

   Yes  : Go to step 4 in the Basic Diagnostic Procedure. Ref. to LAN SYSTEM (DIAGNOSTICS) (EXCEPT FOR HEV)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE .

   No  : Switch from [Factory] to [Market].