LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> BRZ tS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle (Diagnostics)) >> Automatic Transmission System >> DTC U0073: Control Module Communication Bus "A" Off; DTC U0401: Invalid Data Received From ECM/PCM "A"; DTC U0416: Invalid Data Received From Vehicle Dynamics Control Module; DTC U0422: Invalid Data Received From Body Control Module; DTC U0423: Invalid Data Received From Instrument Panel Cluster Control Module >> Circuit description >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS

Battery voltage 9.0V or more
Above condition is established 1 second or more
TYPICAL ENABLING CONDITIONS

Battery voltage 9.0V or more
Above condition is established 1 second or more
CAN bus OFF (U0073) No defect
TYPICAL ENABLING CONDITIONS

Battery voltage 9.0V or more
Above condition is established 1 second or more
CAN bus OFF (U0073) No defect
scientia non olet · About LEMON Manuals