Standard value
WARNING: This page is about a different variant/trim than selected.
| Shift position | While idling [MPa {kgf/cm2 }] | While stalling [MPa {kgf/cm2 }] |
|---|---|---|
| D position | 0.35 to 0.43 {3.6 to 4.4} | 1.20 to 1.38 {12.2 to 14.0} |
| R position | 0.76 to 0.95 {7.7 to 9.7} | 1.41 to 1.63 {14.4 to 16.6} |
NOTE:
When there is an open or short circuit in the line pressure control solenoid ASSY (SLT) system, the line pressure reaches the maximum.
NG: Repair or replacement of transmission valve body ASSY (refer to TRANSMISSION VALVE BODY ASSY )
OK: Go to next step
4 Diagnostic codes clear and driving test
- Follow the SSM4 on-screen instructions to clear the diagnostic codes. (Refer to CHECK LIST FOR INTERVIEW )
- Perform driving test.WARNING: Confirm the safety on the road.
- Follow the SSM4 on-screen instructions to check the diagnostic codes. (Refer to CHECK LIST FOR INTERVIEW
)
Criteria: Diagnostic codes are not output.
NG: Repair or replacement of transmission valve body ASSY (refer to TRANSMISSION VALVE BODY ASSY )
OK: Go to next step
Complete