LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> BRZ tS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle (Service Information)) >> Transmission Valve Body ASSY >> Assembly

Transmission Valve Body ASSY: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Installation of transmission 3 way solenoid ASSY (S3)
    1. Install the transmission 3 way solenoid ASSY (S3) with a bolt.

      Standard value: T=10N.m {102kgf.cm} {7ft.lbf} 

      G12587462Courtesy of SUBARU OF AMERICA, INC.
  2. Installation of transmission 3 way solenoid ASSY (S2)
    1. Install the transmission 3 way solenoid ASSY (S2).

      Standard value: T=10N.m {102kgf.cm} {7ft.lbf} 

      G08554389Courtesy of SUBARU OF AMERICA, INC.
  3. Installation of transmission 3 way solenoid ASSY (S1)
    1. Install the transmission 3 way solenoid ASSY (S1).
      G12587464Courtesy of SUBARU OF AMERICA, INC.
  4. Installation of transmission 3 way solenoid ASSY (S4)
    1. Install the transmission 3 way solenoid ASSY (S4) and harness clamp with a bolt.

      Standard value: T=10N.m {102kgf.cm} {7.4ft.lbf} 

      CAUTION: Do not contact the S1 solenoid connector with the bolt when tightening the bolt.
      G12587465Courtesy of SUBARU OF AMERICA, INC.
  5. Installation of transmission 3 way solenoid ASSY (SR)
    1. Install the transmission 3 way solenoid ASSY (SR) with a bolt.

      Standard value: T=10N.m {102kgf.cm} {7.4ft.lbf} 

      G12587466Courtesy of SUBARU OF AMERICA, INC.