Transmission Control Computer ASSY: Removal
WARNING: This page is about a different variant/trim than selected.
- Disconnection of the battery ground terminal (Refer to
REMOVAL
)
- Removal of the instrument side panel LH (Refer to REMOVAL
)
- Removal of the instrument panel under cover SUB-ASSY No. 1 (Refer to REMOVAL
)
- Removal of transmission control computer ASSY
- Disconnect the 2 connectors from the transmission control computer ASSY.
- Remove 2 nuts to remove the transmission control computer ASSY.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove 2 nuts to remove the transmission control computer ASSY from the transmission control computer bracket.
 Courtesy of SUBARU OF AMERICA, INC.
|