LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> BRZ tS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle (Service Information)) >> Speed Sensor >> Unit Inspection

Unit Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Transmission revolution sensor (SP2) check
    1. Measure the resistance between the terminals.

    Resistance 

    Inspection terminals Inspection conditions Standard value
    Terminal 1 - terminal 2 20°C (68°F) 560 to 680Ω
    G12587434Courtesy of SUBARU OF AMERICA, INC.
  2. Check of transmission revolution sensor (NT)
    1. Measure the resistance between the terminals.

    Resistance 

    Inspection terminals Inspection conditions Standard value
    Terminal 1 - terminal 2 20°C (68°F) 560 to 680Ω
    G12587435Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals