LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> BRZ tS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle (Service Information)) >> Select Lever >> Removal

Select Lever: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Removal of console box ASSY

    (Refer to REMOVAL )

  2. Removal of under cover front AL (refer to REMOVAL )
  3. Removal of under cover COMPL T/M (refer to REMOVAL )
  4. Disconnection of floor shift gear shifting rod SUB-ASSY No. 1
    1. While pressing the shift lock release button, set the select lever to N position.
      G08554433Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the nut and disconnect the floor shift gear shifting rod SUB-ASSY No. 1 from the connecting rod swivel.
      G12587505Courtesy of SUBARU OF AMERICA, INC.
  5. Removal of select lever ASSY
    1. Disconnect the connector.
      G08554435Courtesy of SUBARU OF AMERICA, INC.
    2. Release the wiring harness clamp, and disconnect the wiring harness.
      G08554436Courtesy of SUBARU OF AMERICA, INC.
    3. Remove 4 bolts to remove the select lever ASSY.
      G12587508Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals