LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Ascent Premium >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger >> Intake Duct >> Removal >> Intake Duct No. 1

Intake Duct No. 1

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the under cover front. Ref. to FRONT UNDER COVER
  3. Drain engine coolant. Ref. to COOLING (H4DOTC)>ENGINE COOLANT>REPLACEMENT>DRAINING OF ENGINE COOLANT .
  4. Disconnect the air intake duct No. 1 and the air intake boot.
    G13198576Courtesy of SUBARU OF AMERICA, INC.
  5. Release the lock by sliding the spring, and disconnect the PCV pipe assembly from the intake duct No. 1.
    G13198587Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the vacuum hose and the water hose.
    G13198588Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the intake duct No. 1.
    G13198589Courtesy of SUBARU OF AMERICA, INC.
  8. Disconnect the water hose from the intake duct No. 1.
    NOTE: Remove if necessary.
    G00595295Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals