Engine Intake System (Induction) And Turbocharger (STI): Intercooler: Assembly
- Install the intake duct to the intercooler duct.
Tightening torque:
3 N.m (0.3 kgf-m, 2.2 ft-lb)
- Install the PCV pipe assembly to the intercooler.
Tightening torque:
16 N.m (1.6 kgf-m, 11.8 ft-lb)
- Install the clip (A) and intercooler duct to the intercooler.NOTE: Use a new gasket.
Tightening torque:
16 N.m (1.6 kgf-m, 11.8 ft-lb)