Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary parameters | Execution condition | ||
|---|---|---|---|
| Battery voltage | ≥ 10.9 V | ||
| Barometric pressure | ≥ 75.06 kPa (563.1 mmHg, 22.2 inHg) |
||
| Integrated purge gas amount since engine starting | ≥ 20 g (0.71 oz)(1) | ||
| (Purge control duty ratio = 0% duration time | ≥ 1.5 s | ||
| Purge control duty ratio from above) | 0% | ||
| Ambient air temperature | > -25°C (-13°F) | ||
| Time when the second purge valve control is OFF | ≥ 1.5 s | ||
| Time when the evaporative system leak check module switching valve is closed | < 25 s | ||
|
|||