Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| |Evaporative Leak Check Module pressure sensor output value when ignition switch is ON - intake manifold pressure (absolute pressure) when ignition switch is ON| | ≥ 12.4 kPa (93 mmHg, 3.7 inHg) |
Time needed for diagnosis: 0.32 seconds
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.