LEMON Manuals
: Even more car manuals for everyone
Home
>>
Subaru
>>
2019
>>
WRX STI Limited
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 7 (Engine Control System (Diagnostics) (Except For STI) (4 Of 4))
>>
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
>>
DTC P2420: EVAP System Switching Valve Control Circuit High
>>
Execution Condition
Execution Condition
WARNING:
This page is about a different variant/trim than selected.
Secondary parameters
Execution condition
Battery voltage
≥ 10.9 V
Evaporative Leak Check Module switching valve drive signal
ON