Execution Condition
WARNING: This page is about a different variant/trim than selected.
SECONDARY PARAMETERS AND EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 6 V |
| DTC P0606 CONTROL MODULE PROCESSOR | Under detection |
SECONDARY PARAMETERS AND EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 6 V |
| DTC P0606 CONTROL MODULE PROCESSOR | Under detection |
SECONDARY PARAMETERS AND EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 6 V |
SECONDARY PARAMETERS AND EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 6 V |
| Actual opening angle change amount | > 0.84%/ms |
SECONDARY PARAMETERS AND EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 6 V |
| Actual opening angle change amount | > 2.1%/ms |
SECONDARY PARAMETERS AND EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | > 6 V |
| Continuous time when actual opening angle changing amount is 0%/ms | ≥ 5 s |