LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Manual Transaxle & Differential (TY751)) >> Transfer Driven Gear >> Assembly

Transfer Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Using the ST, install the taper roller bearing (transfer case side).
    CAUTION: Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).
    NOTE: Be careful when handling because the taper roller bearing and the outer race are used as a set.
    ST 927640000 INSTALLER
    G13261506Courtesy of SUBARU OF AMERICA, INC.
  2. Using the ST, install the taper roller bearing (extension case side).
    CAUTION: Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).
    NOTE: Be careful when handling because the taper roller bearing and the outer race are used as a set.
    ST1 498175500 INSTALLER
    ST2 899864100 REMOVER
    G13261507Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals