Differential Bevel Pinion Gear Backlash
WARNING: This page is about a different variant/trim than selected.
Measure the backlash between the differential bevel gear and differential bevel pinion. Adjust the backlash if not within specified limit. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT) (TY75)>FRONT DIFFERENTIAL ASSEMBLY>ADJUSTMENT .
Standard backlash
0.13 - 0.18 mm (0.0051 - 0.0071 in)
| ST1 | 498247001 | MAGNET BASE |
| ST2 | 498247100 | DIAL GAUGE |