Reduction Driven Gear: Adjustment
WARNING: This page is about a different variant/trim than selected.
- Measure clearance "A" between snap ring and transmission case.
Specification:
0.05 - 0.25 mm (0.002 - 0.01 in)
- If clearance "A" is out of standard, select the snap ring within standard.
Snap ring Part No. Thickness mm (in) 805100460 2.0 (0.079) 805100461 2.1 (0.083) 805100462 2.2 (0.087) 805100463 2.3 (0.091) 805100464 2.4 (0.094)