Drive Cycle H
WARNING: This page is about a different variant/trim than selected.
| DTC | Item | Condition |
|---|---|---|
| P0719 | Brake Switch "B" Circuit Low | - |
| P0724 | Brake Switch "B" Circuit High | - |
| P0951 | Auto Shift Manual Control Circuit Range/Performance | - |
Diagnostic procedure:
- Start the engine.
- Operate the stop light switch or the manual mode switch.NOTE: Drive in "D" range and "R" range.
- Read the data of the stop light switch or the manual mode switch using the Subaru Select Monitor. Or measure the terminal voltage.