LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transmission (Diagnostics)) >> Drive Cycle >> Procedure >> Drive Cycle G

Drive Cycle G

WARNING: This page is about a different variant/trim than selected.
DTC Item Condition
P0708 Transmission Range Sensor "A" Circuit High -

Diagnostic procedure: 

  1. Start the engine.
  2. Drive for three seconds at 16 km/h (10 MPH).
    NOTE: Drive in "D" range and "R" range.