Drive Cycle E
WARNING: This page is about a different variant/trim than selected.
| DTC | Item | Condition |
|---|---|---|
| P0801 | Reverse Inhibit Control Circuit/Open | - |
| U0073 | Control Module Communication Bus Off | - |
| U0100 | Lost Communication With ECM/PCM "A" | - |
| U0122 | Lost Communication With Vehicle Dynamics Control Module | - |
| U0140 | Lost Communication With Body Control Module | - |
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module | - |
| U0164 | Lost Communication With HVAC Control Module | - |
| U0401 | Invalid Data Received From ECM/PCM "A" | - |
| U0416 | Invalid Data Received From Vehicle Dynamics Control Module | - |
| U0422 | Invalid Data Received From Body Control Module | - |
| U0423 | Invalid Data Received From Instrument Panel Cluster Control Module | - |
| U0424 | Invalid Data Received From HVAC Control Module | - |
| U1235 | Lost Communication With EyeSight | - |
| U1433 | Invalid Data Received From EyeSight | - |
Diagnostic procedure:
- Start the engine.