LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transmission (Diagnostics)) >> Drive Cycle >> Procedure >> Drive Cycle B

Drive Cycle B

WARNING: This page is about a different variant/trim than selected.
DTC Item Condition
P0711 Transmission Fluid Temperature Sensor "A" Circuit Range/Performance -

Diagnostic procedure: 

  1. Start the engine under condition that ATF temperature is at 20°C (68°F) or below.
  2. Drive in any driving pattern for 20 minutes. (Include driving at a constant legal speed (for 20 seconds) at least once.)
    NOTE: Repeat two or more driving cycles in this driving pattern.