Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria |
Threshold Value |
| ABS : Engine speed - Measured primary pulley shaft speed x 1.129 |
< Table 2 rpm |
ENGINE SPEED SPECIFICATION
| Engine speed (rpm) |
0 |
500 |
1000 |
1500 |
2000 |
2500 |
3000 |
3500 |
| ABS : Engine speed - Measured primary pulley shaft speed x 1.129 (rpm) |
0 |
0 |
50 |
50 |
50 |
50 |
50 |
50 |
| Engine speed (rpm) |
4000 |
4500 |
5000 |
5500 |
6000 |
6500 |
7000 |
| ABS : Engine speed - Measured primary pulley shaft speed x 1.129 (rpm) |
50 |
50 |
50 |
50 |
50 |
50 |
50 |
Time needed for diagnosis:
10 seconds
Malfunction indicator light illumination:
Illuminates when malfunction occurs in 2 continuous driving cycles.