Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary parameters |
Execution condition |
| 12 V battery system voltage |
≥ 10 V |
| Engine speed |
≥ 1000 rpm |
| Transmission range |
Drive |
| Commanded duty of torque converter clutch pressure control solenoid |
≥ 95% |
| Measured primary pulley shaft speed x 1.129 (rpm) |
> Table 1 rpm |
ENGINE SPEED SPECIFICATION
| Engine speed (rpm) |
3700 |
3727 |
3755 |
3782 |
3856 |
4019 |
4213 |
4456 |
| Measured primary pulley shaft speed x 1.129 (rpm) |
0 |
500 |
1000 |
1500 |
2000 |
2500 |
3000 |
3500 |
| Engine speed (rpm) |
4786 |
5213 |
5651 |
6101 |
6569 |
7044 |
7520 |
| Measured primary pulley shaft speed x 1.129 (rpm) |
4000 |
4500 |
5000 |
5500 |
6000 |
6500 |
7000 |