LEMON Manuals
: Even more car manuals for everyone
Home
>>
Subaru
>>
2019
>>
WRX STI Limited
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 2 (Continuously Variable Transmission (Diagnostics))
>>
Diagnostic Procedure With Diagnostic Trouble Code (DTC)
>>
DTC P2751: Intermediate Shaft Speed Sensor "C" Circuit No Signal
>>
Execution Condition
Execution Condition
WARNING:
This page is about a different variant/trim than selected.
Secondary parameters
Execution condition
12 V battery system voltage
≥ 9 V
Transmission range
Drive or Reverse
Measured primary pulley shaft speed
≥ 1000 rpm