DTC P2750: Intermediate Shaft Speed Sensor "C" Circuit Range/Performance: Notes

WARNING: This page is about a different variant/trim than selected.

DTC detecting condition:

Immediately at fault recognition

Trouble symptom:

Shifting shock is felt.
Acceleration is poor during standing start.
Shift control malfunction

CHECK DTC.
Read the DTC using Subaru Select Monitor.

Besides DTC P2750, is DTC P2747 or P2751 displayed?

Yes: Perform the diagnosis according to DTCs other than P2750.

No: Perform the diagnosis according to DTC P2751. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC P2751 INTERMEDIATE SHAFT SPEED SENSOR "C" CIRCUIT NO SIGNAL .