Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Diagnosis 1 Measured primary pulley shaft speed/Measured secondary pulley shaft speed |
< 0.33 or |
| > 2.58 | |
| Diagnosis 2 Measured secondary pulley shaft speed |
> 12250 rpm |
Time needed for diagnosis: 5 seconds
Malfunction indicator light illumination: Illuminates as soon as a malfunction occurs.