Diagnostic Method

WARNING: This page is about a different variant/trim than selected.

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

JUDGMENT VALUE SPECIFICATION

Malfunction Criteria

Threshold Value

Actual pulley ratio ⁽¹⁾ change for 1 second

> 0.04

Commanded duty of shift up pressure control solenoid

> 50%

⁽¹⁾	Actual pulley ratio: Measured primary pulley shaft speed/Measured secondary pulley shaft speed

Time needed for diagnosis: 10 seconds

Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.