LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transmission (Diagnostics)) >> Diagnostic Procedure With Diagnostic Trouble Code (DTC) >> DTC P0751: Shift Solenoid "A" Performance/Stuck Off >> Execution Condition

Execution Condition

WARNING: This page is about a different variant/trim than selected.
Secondary parameters Execution condition
12 V battery system voltage ≥ 10 V
Commanded duty of shift down pressure control solenoid 0%
Engine speed ≥ 1000 rpm
Actual pulley ratio(1) > 1.5
and
< 2.348
(1) Actual pulley ratio: Measured primary pulley shaft speed/Measured secondary pulley shaft speed