Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary parameters | Execution condition |
|---|---|
| Diagnosis 1 12 V battery system voltage |
≥ 10 V |
| Engine speed | ≥ 1000 rpm |
| Measured line pressure control solenoid valve current | ≤ 0.75 A |
| Torque converter clutch circuit control solenoid output command | ON |
| Diagnosis 2 12 V battery system voltage |
≥ 10 V |
| Engine speed | ≥ 1000 rpm |
| Measured line pressure control solenoid valve current | ≤ 0.75 A |
| Torque converter clutch circuit control solenoid output command | OFF |