DTC P0721: Output Shaft Speed Sensor Circuit Range/Performance: Notes

WARNING: This page is about a different variant/trim than selected.

DTC detecting condition:

Immediately at fault recognition

Trouble symptom:

Acceleration is poor during standing start.
No lock-up occurs.
The engine stalls when the vehicle is stopped.
Shift control malfunction

CHECK DTC.
Read the DTC using Subaru Select Monitor.

Besides DTC P0721, is DTC P1706 or P0500 displayed?

Yes: Perform the diagnosis according to DTCs other than P0721.

No: Perform the diagnosis according to DTC P0720. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC P0720 OUTPUT SHAFT SPEED SENSOR CIRCUIT .