Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| When any one of the followings is established: | |
| <Judgment 1> | |
| Actual engine coolant temperature and |
< 60°C (140°F) |
| Σ (Estimated engine coolant temperature - actual engine coolant temperature) | > Value of Map 3 |
| <Judgment 2> | |
| Actual engine coolant temperature and |
< Regulated temperature *- Value of Map 4 |
| Σ (Estimated engine coolant temperature - actual engine coolant temperature) | > Value of Map 5 |
| <Judgment 3> | |
| Actual engine coolant temperature | > 11.1°C (20°F) |
| and Σ (Estimated engine coolant temperature - actual engine coolant temperature) |
> Value of Map 6 |
* Regulated temperature = 89.2°C (192.6°F)
MAP SPECIFICATION 3
| Engine coolant temperature at engine starting (°C (°F)) | -7 (19.4) | 0 (32) | 10 (50) | 25 (77) | 30 (86) | 40 (104) |
|---|---|---|---|---|---|---|
| Threshold Value (°C (°F)) | 1387.5 (2497.5) | 1387.5 (2497.5) | 1387.5 (2497.5) | 1387.5 (2497.5) | 1387.5 (2497.5) | 961.5 (1730.7) |
MAP SPECIFICATION 4
| Estimate ambient temperature (°C (°F)) | -7 (19.4) | 8 (46.4) | 10 (50) | 25 (77) |
|---|---|---|---|---|
| Threshold Value (°C (°F)) | 18.6 (33.5) | 11.1 (20) | 11.1 (20) | 11.1 (20) |
MAP SPECIFICATION 5
| Engine coolant temperature at engine starting (°C (°F)) | -7 (19.4) | 0 (32) | 8 (46.4) | 10 (50) | 30 (86) | 35 (95) |
|---|---|---|---|---|---|---|
| Threshold Value (°C (°F)) | 1387.5 (2497.5) | 1387.5 (2497.5) | 1387.5 (2497.5) | 1387.5 (2497.5) | 1387.5 (2497.5) | 1201.9 (2163.4) |
MAP SPECIFICATION 6
| Engine coolant temperature at engine starting (°C (°F)) | -7 (19.4) | 8 (46.4) | 10 (50) | 25 (77) |
|---|---|---|---|---|
| Threshold Value (°C (°F)) | 1387.5 (2497.5) | 1387.5 (2497.5) | 1387.5 (2497.5) | 1387.5 (2497.5) |
Time needed for diagnosis: Less than 1 second
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.