LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Control System (Diagnostics) (Except For STI) (1 Of 4)) >> Diagnostic Procedure With Diagnostic Trouble Code (DTC) >> DTC P0125: Insufficient Coolant Temperature For Closed Loop Fuel Control >> Diagnostic Method

Diagnostic Method

WARNING: This page is about a different variant/trim than selected.

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

JUDGMENT VALUE SPECIFICATION

Malfunction Criteria Threshold Value
Engine coolant temperature < -15°C (5°F)
Elapsed time after starting the engine
((Smaller value either one of engine coolant temperature and intake air temperature at engine start) ≥-23.3°C (-9.9°F))
≥ 120 s
or
Elapsed time after starting the engine
((Smaller value either one of engine coolant temperature and intake air temperature at engine start) < -23.3°C (-9.9°F))
≥ 300 s

Time needed for diagnosis:  Less than 1 second

Malfunction indicator light illumination:  Illuminates when malfunction occurs in 2 continuous driving cycles.