LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Control System (Diagnostics) (Except For STI) (1 Of 4)) >> Diagnostic Procedure With Diagnostic Trouble Code (DTC) >> DTC P0088: Fuel Rail/System Pressure - Too High Bank 1 >> Execution Condition

Execution Condition

WARNING: This page is about a different variant/trim than selected.
Secondary parameters Execution condition
Elapsed time after starting the engine ≥ 10 s
Fuel cut non-operation time ≥ 3 s
(Target pressure change in every 10 ms ≤ 500 kPa (3750.3 mmHg, 147.7 inHg)
Time described above) ≥ 1.5 s