LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (Except For STI)) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emitting smoke or causing a fire.
  1. Disconnect the ground terminal from battery sensor. Refer to NOTE>NOTE>BATTERY .
  2. Remove the rubber cap.
    G10267309Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the terminal from oil pressure switch.
    G10267310Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the oil pressure switch.
    CAUTION: Catch the engine oil using cloth to prevent it from splashing.
    G10267311Courtesy of SUBARU OF AMERICA, INC.