LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (Except For STI)) >> Oil Level Switch >> Removal >> When Removing Front Crossmember

When Removing Front Crossmember

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front crossmember. Refer to FRONT SUSPENSION>FRONT CROSSMEMBER>REMOVAL .
  2. Disconnect the oil level switch connector from the engine wiring harness, and remove the clip (A) securing the harness.
    G09476614Courtesy of SUBARU OF AMERICA, INC.
  3. Remove clip (A) from the oil pan upper, and remove the oil level switch.
    G09476529Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals