LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical System (Except For STI)) >> V-belt >> Removal >> V-Belt

Section 13 (Engine Mechanical System (Except For STI)): V-belt: Removal: V-Belt

WARNING: This page is about a different variant/trim than selected.
  1. When working on the vehicle
    NOTE: When working on the vehicle, perform the following steps also.
    1. Remove the collector cover. Refer to INTAKE (INDUCTION) (EXCEPT FOR STI)>COLLECTOR COVER>REMOVAL .
    2. Remove the air intake duct. Refer to INTAKE (INDUCTION) (EXCEPT FOR STI)>AIR INTAKE DUCT>REMOVAL .
  2. Attach the tool to the V-belt tensioner assembly, and rotate the tool clockwise to loosen and remove the V-belt.
    G10266716Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals