LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical System (Except For STI)) >> Cam Carrier >> Disassembly >> Cam Carrier RH

Cam Carrier RH

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil pipe from cam carrier RH.
    G09480450Courtesy of SUBARU OF AMERICA, INC.
  2. Loosen the bolts (front camshaft cap RH, intake center camshaft cap RH, intake rear camshaft cap RH, exhaust center camshaft cap RH, and exhaust rear camshaft cap RH) equally, a little at a time in numerical sequence as shown in the figure, and remove each camshaft cap.
    NOTE: Arrange camshaft caps in order so that they can be installed in their original positions.
    G09480451Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the intake camshaft RH and the exhaust camshaft RH from cam carrier RH.
    G09480452Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the filter from cam carrier RH.
    G09480453Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the liquid gasket from cam carrier RH, front camshaft cap RH, intake rear camshaft cap RH and exhaust rear camshaft cap RH.
scientia non olet · About LEMON Manuals