Intake Duct No. 1
WARNING: This page is about a different variant/trim than selected.
• Except for Canada
Remove the vacuum hose, blow-by diagnosis connector harness and wastegate control solenoid valve from the intake duct No. 1.
 Courtesy of SUBARU OF AMERICA, INC.
|
• For Canada
- Remove the vacuum hose and blow-by diagnosis connector harness from the intake duct No. 1.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the wastegate control solenoid valve and air by-pass pipe from the intake duct No. 1.
 Courtesy of SUBARU OF AMERICA, INC.
|