General Tool
WARNING: This page is about a different variant/trim than selected.
| TOOL NAME | REMARKS |
|---|---|
| TORX® socket E10 | Used for disassembling and assembling the turbocharger. |
| Mighty Vac | Used for checking waste gate actuator and air by-pass valve. |
| Urethane sheet Width x Height x Thickness Approx. 300 mm x approx. 200 mm x approx. 10 mm (Approx. 11.81 in x approx. 7.87 in x approx. 0.39 in) |
Used for removing and installing intercooler. (MT model) |