LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (STI) >> Engine Coolant >> Replacement >> Draining Of Engine Coolant

Draining Of Engine Coolant

  1. Lift up the vehicle.
  2. Remove the under cover. Refer to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
  3. Remove the drain plug to drain engine coolant into container.
    NOTE: Remove the coolant filler tank cap so that engine coolant will drain faster.
    G06345338Courtesy of SUBARU OF AMERICA, INC.
  4. Install the drain plug.
    NOTE: Use new O-rings.
  5. Install the under cover. Refer to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>INSTALLATION .
scientia non olet · About LEMON Manuals