LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Outback 3.6R Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center >> Switches and Harness >> Removal >> Illumination Control Switch

Illumination Control Switch

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover assembly - instrument panel LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Release the claws and remove the illumination control switch.
    G13251269Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals