LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Forester Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center >> Switches and Harness >> Removal >> Driver Monitoring System Switch

Driver Monitoring System Switch

  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Remove the driver monitoring system switch.
  1. Release the claws, and then remove the driver monitoring system switch (h).
G10277283Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals