LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Suspension >> Front Suspension System >> Flexible Draw Stiffener (tS Model) >> Removal

Flexible Draw Stiffener (tS Model): Removal

  1. Removal of undercover front AL (Refer to REMOVAL )
  2. Removal of undercover COMPL T/M (Refer to REMOVAL )
  3. Removal of flexible draw stiffener ASSY
    1. Loosen the lock nut, rotate the rod so that the rod enters into the housing body, and adjust the threaded part to the dimension shown in the figure.
      G12588565Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the bolts and then remove the flexible draw stiffener ASSY.
      G12588566Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals