LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Suspension >> Front Suspension System >> Flexible Draw Stiffener (tS Model) >> Installation

Flexible Draw Stiffener (tS Model): Installation

  1. Installation of flexible draw stiffener ASSY
    1. Install the flexible draw stiffener ASSY with the bolts.
    2. When using a new flexible draw stiffener.
      1. Remove the βpin.
        NOTE: Dispose the removed βpin.
    3. When reusing the flexible draw stiffener.
      1. Rotate the rod so that the rod hole aligns with the housing end surface.
      G12588571Courtesy of SUBARU OF AMERICA, INC.
    4. Tighten the lock nut.
  2. Installation of undercover COMPL T/M (Refer to INSTALLATION )
  3. Installation of undercover front AL (Refer to INSTALLATION )
scientia non olet · About LEMON Manuals