LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) >> Air Conditioner Panel (For Manual Air Conditioning System) >> Installation

Air Conditioner Panel (For Manual Air Conditioning System): Installation

  1. Installation of air conditioner control ASSY
    1. After positioning with the cable, engage the 2 claws and connect the heater control cable SUB-ASSY. (installed on the RH side)
    2. After positioning with the cable, engage the 2 claws and connect the heater control cable SUB-ASSY. (Installed on the LH side)
    3. Connect each connector.
    4. Install the 2 screws, engage the 6 claws, and install the air conditioner control ASSY.
  2. Installation of instrument cluster finish panel garnish NO. 1 (Refer to INSTALLATION )
  3. Installation of instrument cluster finish panel garnish NO. 2 (Refer to INSTALLATION )
  4. Installation of instrument cluster finish panel SUB-ASSY CTR (Refer to INSTALLATION )
  5. Installation of the instrument panel ornament (Refer to INSTALLATION )
  6. Installation of console box ASSY (Refer to INSTALLATION )
scientia non olet · About LEMON Manuals