LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (M/T Clutch System) >> Clutch Release Cylinder Assy >> Removal

Clutch Release Cylinder Assy: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Handling/working precautions
    CAUTION: Do not let clutch fluid come into contact with the painted surface. If it is splashed, immediately wash it off with water.
  2. Disconnection of master cylinder-to-release cylinder hose
    1. Remove the union bolt and 2 gaskets and disconnect the master cylinder-to-release cylinder hose from the clutch release cylinder ASSY.
    G12587965Courtesy of SUBARU OF AMERICA, INC.
  3. Removal of clutch release cylinder ASSY
    1. Remove 2 bolts to remove the clutch release cylinder ASSY.
G12587966Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals